Banner Fixings

Shock-cord.

This is the best product to use to tie up a banner. Use only enough tension to keep the banner taught but still allowing plenty of 'give' in the shock-cord.

£1 per metre

Brick fixing kit.

This kit is for fixing a banner to a flat wall. It contains enough components to display a 6 metre banner. Longer banners will require additional kits. Each kit contains one multi-purpose drill bit, and twenty screws, washers and plugs.The multi-purpose bit will drill into most materials. Set your drill to slow speed and NOT on hammer action. Drill and plug the wall where the eyelets fall. Using the screw and washer trap the eyelet back against the wall. Start at one end of the banner and work your way along keeping the banner taught and flat to the wall.

£7.50 per kit.

 

Removable banner kit.

This is for a situation where your banner has to be removed and replaced frequently. The kit contains enough components to display a 3m banner. Each kit contains one multi-purpose drill bit and ten hooks, plugs and bungees.

Drill and plug the wall 150mm beyond each eyelet. Push the bungee through the eyelet with the ball at the front and the loop behind. Hook the banner in place.

£10 per kit.

 

Large Ties.

For quickly and securely fixing lightweight signs to posts.

£0.50 each.

 

Ball Bungees

    

An easy way to fix your banner

6" long.  £0.50 each

 

For further advice on fixing your signs or banners please call us.

All prices exclude carriage and VAT